skip to Main Content
+86 15205060783 info@unuo-instruments.com

SATRA TM230 Footwear Dynamic Water Resistance & Penetration Tester UI-FT11B

Evaluate finished footwear waterproof performance using dual independent stations, adjustable flexing speed, and automated stainless steel sensor leak detection

  • Test positions:  2
  • SATRA TM230 | ISO 20344
  • 18 months warranty
  • CE & ISO17025 calibrated certificate

Description

This footwear dynamic water resistance tester is designed as per SATRA TM230 to measure finished shoe water penetration by amount the shoe on artificial feet and flex it in a depth of water tank.

1. Test Standard

SATRA TM230, ISO 20344: 2021

2. Footwear Dynamic Water Resistance Test Principle

The SATRA TM230 dynamic footwear water penetration test is designed to evaluate the waterproof performance of finished shoes and boots. It is suitable for testing a wide variety of footwear, with the exception of shoes whose outsole rigidity or stiffness exceeds the machine’s flexing capacity.

During the test, the specimen shoe is mounted onto an artificial foot on the dynamic water resistance tester. The water level is adjusted according to the footwear type, typically set slightly above the featherline (the bonding seam between the upper and sole).

The machine then flexes the footwear at 25±2°in water at a controlled speed 60 ± 6 cycles/min, allowing operators to check for water ingress periodically or after a predetermined number of test cycles. Additionally, an integrated sensor linked to the artificial foot provides automated water leak detection. This machine is an essential footwear testing equipment.

3. Unuo SATRA TM230 Shoe Dynamic Water Resistance Tester Features

  • Dual Independent Stations:Test two shoes at the same time. Each station has its own counter and stops individually if water gets in, so one test won’t stop the other—perfect for overnight testing.
  • Clear Water Tank:The high-transparency tank lets you easily watch the shoe surface, seams, and sole bonding to spot bubbles and water leaks.
  • Adjustable Flexing Force:Easily adjust the settings based on the shoe’s material hardness to ensure accurate testing without over-bending or under-bending.
  • Smart Touchscreen Control:Clearly shows cycle counts, running time, and machine status in real time. It stops automatically when your target test cycles are reached.
  • Rust-Resistant Design:The water-contacted parts are made of anti-corrosion materials, keeping them durable against water and easy to clean and drain.
  • Automatic Water Penetration Detection: The integrated electrical detection system identifies water penetration inside the footwear specimen. When water reaches the detection circuit, the corresponding test station automatically stops and records the test cycle count.

4. Unuo SATRA TM230 Dynamic Footwear Water Penetration Tester Specification

Item Specification
Test Fixtures 2 sets (tests 2 specimens simultaneously per cycle)
Test Speed 60 ± 6 cycles/min
Flexing Angle 25 ± 2°
Starting Angle 6 ± 2°
Toe Clamp Travel Distance 0 ~ 25 mm
Counter LED display, settable from 0 to 999,999 cycles
Dimensions (Approx.) 75 × 80 × 80 cm
Weight (Approx.) 50 kg
Power Supply 1 Phase, AC 220V, 3A (or customized per country/requirement)

5. Applicable To Test:

The SATRA TM230 footwear water resistance tester is suitable for evaluating the water penetration resistance of various types of finished footwear, including: Outdoor Hiking Shoes and Trekking Boots, Waterproof Safety Shoes and Work Boots, Functional Sports Shoes, Military and Police Combat Boots, Outdoor Rain Boots and Functional Work Boots

SATRA TM230 Dynamic footwear water penetration tester specimen

6. FAQ

  1. What is the difference between SATRA TM230 and SATRA TM77
Item SATRA TM230 SATRA TM77
Flexing angle 25±2° Up to 45°
Speed 60±6cpm 0~140cycles/min
Fixture to shoe installation Inside of the shoe Outside of the shoe
Driven by compressed air Motor
  1. Can this tester accommodate different shoe sizes and boot heights?

The tester accommodates footwear specimens within the compatible size and height range of its artificial foot and clamping system. For unusually high boots or oversized footwear, compatibility should be confirmed before testing. Please contact us with your footwear dimensions if you need assistance.How does the machine detect water penetration automatically?

  1. How can this machine auto-detect water?

The artificial foot is made of stainless steel. Once water penetrates inside and forms an electrical circuit, the test station stops immediately and records the precise cycle count.

 

    We Will Answer Your Email Within 12 Hours!


    Submit your inquiry for this product & get a fast quote.






    End UserReseller / Distributor


    Back To Top