Unuo Instruments supplies EN71 toy testing equipment. EN71 has clear requirements for toy safety. Although the standard cannot cover and indicate all potential hazards of toy, it minimizes accidents covered by the specification. Unuo Instrumentsā toy testing machine includes most of the physical safety testing equipment listed in the specification. Toy testing machine includes EN71 toy flammability tester, fabric flammability tester, small object, sound level, compression dics, flexure and etc.
Conform to: EN71, ASTM F963, 16 CFR 1500, GB and other toy testing standards.
Send us your needs for a free solution Now!
Tested With Unuo Toy Testing Equipment
Make Your Quality Visible
Unuo Instruments is a toy testing equipment manufacturer with great cost-effective shoe testing machine and trustworthy service. Supported by experienced technical and R&D team, Unuo guarantee to supply toy testing equipment 100% matching to test standard. Besides, we can customized equipment as per your requirements. Contact us for details Today!
EN 71-1 Safety of Toys - Part 1: Mechanical and Physical Properties
EN71-1 4.10Ā Gap Test Rod
Gap Test Rod
Gap Test Rod: 3mm, 5mm, 6mm, 12mm
To test if tested accessible hole has potentially hazardous finger entrapment in sheet metal and other rigid material in toys.
EN71-1 8.2 Small Parts Cylinder
Small Object
Small Parts Test Cylinder
To know if the tested object will fit entirely within the cylinder or not so that we can know tested toy component or parts has a potential hazard of choking to children or not. Find more about Small Parts Cylinder
EN71-1 8.3 Torque Gauge
Torque Test
Torque Gauge/ Torque Tester
To test if the toy component will disassemble or not after applied certain torque force or rotate it to a certain angle.
EN71-1 8.3 Torque Grip
Torque Test
Torque Grips
To clamp toy component for torque test.
EN71-1 8.4 Pull Tester
Tension Test
Ornaments Pull Strength Tester
To test if the sample will break under a certain force or not. Find more about: Ornaments Pull Strength Tester
Feeler Gauge
To test if the toy component is grippable or not.
Seam Grip
To sample toy for tension test.
EN71-1 8.5 Drop Tester
Drop Test
Drop Tester
To test if the casing of toys intended for children too young to sit up unaided has separated into parts or cracked. And to test if small parts, sharp edge, sharp point will be accessible or not.
EN71-1 8.8 Compression Test Dics
Compression Test
Compreesion Test Dics
To test if the casing of toys intended for children too young to sit up unaided has separated into parts or cracked. And to test if small parts, sharp edge, sharp point will be accessible or not.
EN71-1 8.10 Accessible Probe
Accessibility
Accessible Probe
To check if any area of toy can be touched by any portion forward of the collar of the accessibility probe. Find more about: Accessible Probe
EN71-1 8.11 Sharpe Edge
Sharp Edge/Accessible Edge
Sharp Edge Tester
To test if the tested adge is potentially hazardous sharp edge to child or not. Find more about Sharp Edge Tester
EN71-1 8.12 Sharp Point Tester
Accessible Point/Sharp Point
Sharp Point Tester
To test if the tested toy point has potentially hazardous sharp point or not. Find more about Sharp Point Tester
EN71-1 8.13 FlexibilityĀ
Wire and Rod/Flexture Test
EN71 Flexture Tester
Test whether the metal wire or rod that plays the role of soft support in the toy is dangerous due to breakage during the bending process.
EN71-1 8.14 Controlled Temp. and Humidity Chamber
Environmental control
Temp. And Humidity Control Chamber
To condition sample under specified temp. and humidity range. Find more about: Temp. and humidity chamber
EN71-1 8.15 Liquid Leak Test Needle
Liquid Leak Test
Liquid Leakage Test Needle
To check if the liquid-filled toy has leakage potential or not.
EN71-1 8.16 Rattle Test Template
Geometric Shape of Certain Toys
Rattle Test Fixture
To determine if the teethers, teething toys, and infant rattle conform to dimensional requirements.
EN71-1 8.17 Mouth-actuated Toy Durability Tester
Durability Test
Mouth-actuated Toy Durability Tester
To test if any component will release adfter the durability test.
EN71-1 8.18 Folding or Sliding Mechanisms
8.18.1 Load
LoadĀ
To simulate child’s weight: Load A : (25Ā±0.2) kg, Load B :(50Ā±0.5) kg, Load C: (100Ā±1) kg
EN71-1 8.18.3 Other Collapsible Toys
Locking Device Performance Test
Brake Performance Testing Ramp 0~45degreeĀ
Angle can be adjusted
EN71-1 8.19 Cord Electric Resistivity Tester
Electric Resistivity Test
Cord Electric Resistivity TesterĀ
To determine the electric resistance
EN71-1 8.21 Static Strength
Static Strength Test
LoadĀ
To simulate child’s weight: Load A : (25Ā±0.2) kg, Load B :(50Ā±0.5) kg, Load C: (100Ā±1) kg
EN71-1 8.22 Dynamic Strength
Dynamic Strength Test
Load With Arms
Load with arms to be secured to toy to simulate toy in dynamic :
Load A : 54.5kg, Load B :29.5kg
EN71-1 8.22 Dynamic Strength
2m/s Dynamic Strength Tester
Load With Arms
Load with arms to be secured to toy to simulate toy in dynamic :
Load A : 54.5kg, Load B :29.5kg
EN71-1 8.24 Kinetic Energy Tester
Kinetic Energy Test
Projectiles Kinetic Energy TesterĀ
To test the kinetic energy of the projectile toy
EN71-1 8.25.1 Thickness Tester
Thickness Test
Plastic Film Thickness TesterĀ
To test plastic film thickness
EN71-1 8.25.2 Adhesion
Adhesion Test
Feeler Gauge
To test if the toy component is grippable or not.
EN71-1 8.26 Brake Performance Testing Ramp
Brake Performance Test
Brake Performance Testing Ramp 0~45degreeĀ
Angle can be adjusted
EN71-1 8.28 Sound Pressure Level
Sound Level Test
Sound Pressure Level TesterĀ
EN71-1 8.28 Sound Pressure Level
Sound Level Test
Sound Pressure Test Stand
EN71-1 8.31 Toy Hinged Lid Durability Tester
Hinged Lid Durability Test
Toy Hinged Lid Durability TesterĀ
To test toy hinged lid/box cover by vertically opening and closing.
EN71-1 8.32 Small Ball Test Plate
Small Ball Test
Small Ball Test TemplateĀ
To test is tested object can pass the template freely or not.
EN71-1 8.36 Cords and Chains Perimeter Tester
Perimeter Test
Cords and Chains Perimeter Tester
To test rope perimeter.
EN71-1 4.24 & 8.37 YOYO Ball Measurement Equipment
Initial Length and Elastic Constant K Test
YoYo Ball Measurement Test Equipment
To initial length and elastic constant k.
EN71-1 8.38 Breakaway Feature Separation Test
Breakaway Feature Separation Test Equipment
To test if tested objected will separate or not.
EN71-1 8.39 Self-retracting Cord
Self-retracting Cord Test
Self-retracting Cording Test Equipment
To test if the recoil mechanism is able to lift the mass by retracting the cord or chain more than 6mm or not.
EN71-1 8.40 Cord, Chains and Clectrical Cables Length Measure Equipment
Length Measurement
Length Measure Equipment
To measure object length with specified weight loaded.
EN71-2 Safety of Toys - Flammability
EN71-2 Flammability
Toy Flammability Test
Toy Flammability Tester
To measure toy flammability resistance ability accordingly to EN71-2.
EN71-2 Safety of Toys - Flammability
EN71-3 Chemical Elements Migration
Migration Test
ICP-OES / ICP-MS
To measure toy products’ chemical element migration.
Children Products Safety Testing Related Topics
1. Children Shoe Testing
EN71 is especially for toy safety testing. If you are looking for children’s shoe testing machine, please check shoe testing machine here.