Sole Puncture Resistant Tester UI-FT03-1
Sole Puncture Resistant Tester is to test safety shoe sole steel plate insert nail puncture resistance/penetration ability.
- Unuo Instruments
- 18 months warranty
- CE & ISO17025 calibrated certificate
- ISO 20344, EN 12568 and etc
Sole Puncture Resistant Tester is to test safety shoe sole steel plate insert nail puncture resistance/penetration ability as per ISO 20344, EN 12568, ASTM F2413 and etc.
Unuo Sole Penetration Tester Features
- Can do Toe Cap Compression Test by changing the test clamp;
- Capacity: 30KN & 50KN for choice;
- Touch screen control;
- Can connect with computer for dynamic test data, test result edit and etc.
- Emergency stop
Sole Insert Nail Puncture Resistant Test Principle: This insert puncture resistant tester is to simulate people in safety shoe to step on nail. Place the shoe sole with insert, then to puncture the sole with steel nail in certain speed until the point has penetrated completely and record the max. force. Here for more Safety Shoe Testing Machine.
Development: In order to make the test data more intuitive, we upgraded the machine to connect to a computer operation. Dynamic changes of test values can be observed both in the machine(touch screen) and computer. Computer control is more convenient to save the data.
Unuo Sole Puncture Resistant Tester Specification:
|Control method||LCD Touch screen controlled|
|Pressure sensor||Load cell|
|Capacity||30KN or 50KN|
|Unit Options||Kgf, lbf, N, KN, Kpa, Mpa, mm, inch and etc.|
|Speed||Toe cap compression: (5±2)mm/min|
|Sole steel plate:(10±3)mm/min|
|Power supply||1∮AC 220V 50/60HZ|
|Standard||GB/T 20991-5.5/5.8, ISO 20344, CAN/CSA-Z195|